However, as with any type of new technology we must approach the results with caution and strive to find conclusive data that definitively shows that these newer technologies are beneficial and do not cause any increase in complication rates. As we have seen with some of the devices that have been developed throughout in the recent past, promising initial results may certainly prove later to have perhaps less potential benefit than initially thought. While I do believe that these novel areas need to be explored, we need to approach them cautiously. In addition, despite how successful any device may be, there has never been a prosthesis or device that has been implanted in a patient that is not at one point needed to be revised either from an infection or failure or dislodgement or other type of potential complication that can occur. We must maintain patient safety as our primary goal and approach this promising technology very cautiously.
Lumbar (Low Back) Dynamic Stabilization - A Patient's Guide
Why do metal implants affect spinal biomechanics?
Partly, because stainless steel and titanium are rigid and far less compliant
than bone. These rigid implants can cause significantly more stress on the neighboring
levels of the spine. Some research has shown excessive motion at the neighboring
non-instrumented levels in the spine. Both of these effects are felt to contribute
to premature degeneration of nearby levels, or what is termed adjacent segment
disease. This degeneration can either occur in previously healthy levels, or
accelerate the breakdown of levels with early signs of disease. Adjacent segment
disease is associated with worsening disc disease, additional bone spur formation,
and overgrowth of the spine's joints (facet joints) which can cause narrowing
of the spinal canal and further nerve compression.

How is dynamic stabilization different?
Dynamic stabilization, also called flexible or soft stabilization, is a growing
area of spine surgery that potentially can reduce some of the problems inherent
with metal implants. The long-term goal of dynamic stabilization is to treat
the current problem and simultaneously reduce adjacent segment disease.
Dynamic stabilization uses flexible materials (constructs) to stabilize the affected level or levels without transmitting excessive forces. The flexible portion of the construct limits excessive motion while allowing a degree of mobility. Dynamic stabilization also reduces the load on the spine's joints (facets) and disc space, which may reduce pain.
Find A Professional in Your Area



