SpineUniverse Community Advice
Get help and share your story with others who know what you're going through.
Please register or log in to join the discussions!

Globus' Transitions spine stabilization device

Started by diabetes np on 08/05/2010 12:17pm

What is the track record on Globus' Transitions device? Failures? Success? This device has been recommended for L3-4 along with L4-5 fusion. Hx 1996 diskectomy L4-5, laminectomies @ L4-S1, spinal stenosis, DDD, accelerated, from 1996 surgery. Had MVA 12/09 with onset 3 bulging discs in C-spine and additional bulging discs @ L2-3 and L4-5. Any problem with screws coming loose? Are they also titanium?

Do you find this discussion helpful?
0

1 Response

Like/Dislike
0

Transition is a fairly new device...a year or so old so i don't know if you will be able to find a ton of information on it or the results. I do know that it is a dynamic stabilization device so to speak. It is in theory supposed to protect the level above from deteriorating due to adjacent level disease. There is a flexible portion that is at the top of the construct and then a rigid rod at the level or levels below. The screws are titanium and really any scews can have loosening so it's always a risk in any instrumented spinal procedure. I do think from my limited experience that it is a novel device but again, there are always risks associated with any procedures so that's something you have to keep in mind. Get a few opinions and make an informed decision. My best advice is ask around who is a very good spine surgeon in the area and also look for a fellowship trained spine surgeon. It basically means they had an entire year after their residency where they specialized in just spinal procedures. Best of Luck.

SHOW MAIN MENU
SHOW SUB MENU
Cancel
Delete